According to Laser Tools, one of the most versatile tools you should have in your toolbox is a die grinder.
This Air Pencil Die Grinder from Laser Tools, part number 7149, adds even more versatility with its ultra-slim profile and light weight, making for great manoeuvrability and suitable for intricate work.
By its very nature, an air-powered die grinder is quite bulky and it’s connected up to a heavy workshop compressed air line. However, this air pencil is small, light and compact; and it’s connected to the workshop air line by 1.4 metres of super-thin and very flexible hose, making it easy to use even in really tight locations with limited access. Although it weighs just 200 grams, performance is not compromised, the air pencil spins up to 70,000 rpm.
Designed for use with the Laser Tools Tungsten Carbide Burr sets, part numbers 6988 and 6989, the air pencil die grinder has numerous uses, from finishing off weld beads, removing rust and corrosion, enlarging or slotting previously drilled holes, to porting and polishing of cylinders heads.
The securing collet accepts attachments with 1/8 inch or three millimetre shafts and two spanners are provided to tighten the collet onto the attachment. Works with a recommended air pressure of 90 psi (6.2 bar).
Available now from your Laser Tools stockist.
For more information contact Tech ‘n’ Tools on 01 419 1611 or visit www.techntools.ie.