Kia Motors has revealed more details of its new intelligent Manual Transmission (iMT), which has been designed for a range of mild-hybrid electric vehicles (MHEVs) from Kia.
The ‘clutch-by-wire’ system is engineered to boost fuel efficiency and reduce CO2 emissions, while retaining the driver engagement of a conventional manual transmission.
Instead of a mechanical linkage, the iMT’s clutch operates purely electronically, and is integrated seamlessly with a 48V MHEV powertrain. The iMT works with the mild-hybrid starter generator (MHSG) to switch off the engine earlier than Kia’s Idle Stop & Go start-stop system when coasting to a halt. This improves overall fuel efficiency and can reduce CO2 emissions by around three per cent in real-world driving conditions.
The chosen gear remains engaged even with the engine off. The engine restarts in the same gear as soon as the driver presses either the brake or accelerator pedals thanks to the burst of power provided by the MHSG. The transmission restarts the engine in neutral (with an open clutch) if the driver pushes the clutch pedal to change gear, or if the vehicle speed is too low for the current engaged gear.
How it works – step-by-step
- The driver leaves the car in-gear as it starts to coast, gently slowing the car down (e.g. for a corner, junction, or traffic)
- While in-gear, the iMT sends an electronic signal to the gearbox and MHSG to seamlessly switch off the engine and open the clutch
- With the engine switched off, the car continues coasting, with the open clutch limiting deceleration and allowing the car to make the most of its kinetic energy
- As the driver pushes the accelerator to pick up speed, or engages the clutch to change gear, the MHSG restarts the engine in the driver’s selected gear, or in neutral (with an open clutch)
- Electric power from the MHSG and 48V battery instantly brings the engine and transmission up to the correct speed
- If the car drops below a certain speed, the engine restarts with assistance from the MHEV system, and the clutch closes, to avoid labouring the engine in the engaged gear
Kia’s new iMT has been developed at the Hyundai Motor Europe Technical Centre in Offenbach, Germany, overseen by Dr Michael Winkler, Head of Powertrain, who said: “We are always looking at new ways to improve powertrain efficiency and performance, and the iMT is one such innovation. An automatic or a double-clutch transmission suits a lot of drivers, but European drivers in particular still love changing gear for themselves. Alongside the increasing demand for electrified models, the iMT is a result of us exploring ways to electrify the ‘classic’ manual transmission.
“Electrification is an overarching development theme across our European powertrain division, and our work encompasses the development of 48V mild-hybrid powertrains, through to the new ‘clutch-by-wire’ iMT as a complementary technology. We want to continue providing drivers with a familiar and engaging manual gear change, so this is an ideal solution for the new range of MHEV powertrains we are rolling out across Europe in the months ahead.”